RF Receiver + Touch Remote for RGB LED Tape (216w max) ILRC001 - Integral

Description of ILRC001 - Integral

This is product manufacturers code ILRC001 by Integral LED. If you need to contact us about this product, please quote our product reference of 16328.

The receiver unit is installed between your LED driver (power supply) and the LED Tape. It is supplied with an RGB touch remote control which acts as the transmitter.

Each receiver can be paired with to up to 10 remote controllers at the same time.

• RF (radio frequency) receiver
• Power input: 12-24v DC (from LED driver)
• Maximum output current: 9A (3A x 3 channels)
• Maximum output power with 12v supply: 108 watts (36w per channel)
• Maximum output power with 24v supply: 216 watts (72w per channel)

With the RGB colour changing remote control, you can easily change your strip colour by choosing the colour area on the central touch circle or pressing the mode button for 11 colour modes, control the brightness and change the speed when choosing the dynamic light mode.