B-Grade: 60w Transformer for halogen lighting (fly lead) ET60FLY - Leyton Lighting

Description of ET60FLY - Leyton Lighting

This is Leyton Lighting part no. ET60FLY. If you need to contact us about this product, please quote our product reference of 14624.

Transformer for 10w - 60w of low (12v) voltage halogen lighting, with hard wired fly lead and input cable. There are no screw terminals on the transformer.

This transformer powers low (12v) lighting up to a maximum of 60w. This transformer is designed to be used with a single low voltage MR16, MR11, G4 halogen lamp - 10-60w.

The minimum load for this transformer is 10w.

This transformer has a thermal cut-out which will automatically shut off in the event of a short circuit or current overload and can also be dimmed using most types of mains resistive and low voltage inductive dimmers.

The length of the transformer is 119mm + the flanges at each end with fixing holes. The total length including the fixing flanges is 130mm

What is B-Grade stock?

B-Grade stock are products that may have damaged packaging, minor cosmetic damage, been previously used as demonstration items, or have been returned as an unwanted item by a customer. In all cases the product is in full working condition.

They are therefore individual items available at ridiculously reduced (often less than cost) prices, which should not be confused with clearance products, which are 100% brand new products at reduced prices.

• These are products with damaged packaging, minor cosmetic damage, or are ex-demonstration models
• They may not be brand new, and it is possible that they have been previously installed.
• They will be in full working condition.
• There is limited stock available
• Normal delivery charges will apply