Universal Emergency Module (3w, self-test, for compatible Kosnic panels) UEM03/ST - Kosnic

Description of UEM03/ST - Kosnic

This is product manufacturers code UEM03/ST by Kosnic. If you need to contact us about this product, please quote our product reference of 23124.

The Universal Emergency Module (UEM) with Automatic Self-Test (AST) is suitable for Kosnic class III luminaires with integrated LEDs and separate LED drivers. The DC voltage output is adjusted within the UEM’s limits to the level required to operate the luminaire load and then the current is Limited to ensure an operation time of three hours. This gives a typical power output of 3w but will depend on the characteristics of the luminaire. The UEM can be installed within a luminaire or within the ceiling void. In the event of a power cut the replaceable internal lithium-ion battery will supply the luminaire through a connection that must be made between the LED driver output and LED luminaire input. Suitable for use with compatible Kosnic products.

• Loop-in and loop-out push wire terminals
• For maintained or non-maintained emergency lighting systems
• Internal Li-ion battery with improved lifespan
• Battery: Li-ion KBAT2600
• Output wattage: 24-54Vdc
• Battery capacity: 4800mAh
• Output current: 40-95mA
• Easy battery replacement
• Built in self test function according to BS-EN-62034-2012
• Emergency conversion time: 1s
• Emergency operation time: >3 hours
• Charging time: 24 hours
• Ambient temperature: 0°C to 45°C
• Maximum case temperature: 75°C
• ICEL endorsed
• EM driver isolation (LED driver and LED light source are switched off in emergency mode)
• Variety of connector leads included
• Cut out diameter required (if using recessed holder for LED indicator): 126mm

Previous Kosnic product code: CEW03LIC/S