RF Receiver + Button Remote for RGB LED Tape (216w max) ILRC002 - Integral

Description of ILRC002 - Integral

This is Integral LED part no. ILRC002. If you need to contact us about this product, please quote our product reference of 16329.

The receiver unit is installed between your LED driver (power supply) and the LED Tape. It is supplied with an RGB button remote control which acts as the transmitter.

Each receiver can be paired with to up to 10 remote controllers at the same time.

• RF (radio frequency) receiver
• Power input: 12-24v DC (from LED driver)
• Maximum output current: 9A (3A x 3 channels)
• Maximum output power with 12v supply: 108 watts (36w per channel)
• Maximum output power with 24v supply: 216 watts (72w per channel)

With the RGB colour changing remote control, you can easily change your strip colour by choosing 16 static colours or 6 dynamic light modes, control the brightness and change the speed when choosing the dynamic light mode. Pressing the loop play button allows you to play the 6 dynamic light modes continuously.