RF Receiver + Button Remote for RGB LED Tape (360w max) ILRC009 - Integral

Description of ILRC009 - Integral

This is product manufacturers code ILRC009 by Integral LED. If you need to contact us about this product, please quote our product reference of 16330.

The receiver unit is installed between your LED driver (power supply) and the LED Tape. It is supplied with an RGB button remote control which acts as the transmitter.

Each receiver can be paired with to up to 10 remote controllers at the same time.

• RF (radio frequency) receiver
• Power input: 12-24v DC (from LED driver)
• Maximum output current: 15A (5A x 3 channels)
• Maximum output power with 12v supply: 180 watts (60w per channel)
• Maximum output power with 24v supply: 360 watts (120w per channel)
• 3 x AAA batteries (not included) are required for remote.

This RGB colour RF (Radio Frequency) receiver and touch/button remote control can be used with Integral RGB colour changing strips. With the RGB colour changing remote control, you can easily change the strip colour by choosing the colour area on the central touch circle or pressing the mode button for 10 colour modes, control the brightness and change the speed when choosing the dynamic light mode. You can also control the Red, Green and Blue colour individually by pressing the R+ or R-, G+ or G- and B+ or B- buttons.