30w T4 fluorescent tube (2700K, 766mm inc pins, 750mm excl pins) LFT430 - Robus

Description of LFT430 - Robus

This is product manufacturers code LFT430 by Robus. If you need to contact us about this product, please quote our product reference of 23012.

This is a 30w T4 tube that is 766mm long including the pins at each end. It is used in under cupboard lights and some illuminated mirrors.

Please be aware that there are multiple sizes of 30w T4 tube available, if you need a different size, please contact us to make sure you get the right product.

This 30w bulb is 750mm long excluding pins and 766mm long including pins. The manufacturer specifies a tolerance of +/- 2mm for these tubes.

Please note: When buying T4 lamps, it is important to purchase lamps from the same manufacturer as the light fitting that you have or at least check the size very carefully. T4 lamps vary between manufacturers in tube length and cap style, so are unlikely to fit other manufacturers fittings.

T4 fluorescent fittings have been discontinued since 2015 due to EU regulations. The electronics are located in the light fitting and not the tube. If you are finding your lamps are not lasting as long as expected, this would indicate a fault in the light fitting and not the tube - unless the tube is physically smashed it's very unlikely to have a fault. You can test tubes and fittings by swapping tube from another working fitting. Unfortunately manufacturers no longer provide a guarantee for T4 tubes, as the light fittings they are installed into may be approaching the end of their life.