V-Pro IR Dimmer (IJVI102, classic victorian brass, 100w max, 2-gang, 1-way) IJVI102 - Varilight

Description of IJVI102 - Varilight

This is product manufacturers code IJVI102 by Varilight. If you need to contact us about this product, please quote our product reference of 23644.

The V-Pro IR dimmer series is for dimming LED lighting. This is a master dimmer, which controls the connected lights. It is controled via touch, or via infra-red remote control. Multiple supplementry dimmers can be added to this master dimmer to provide other control locations.

This master dimmer module will control up to 10 dimmable LED bulbs with a total wattage up to 100w. There is no minimum load requirement.

All V-Pro dimmers offer superior dimming technology to deliver the best possible dimming performance for a given load. V-Pro dimmers are suitable for mains lighting and most dimmable electronic transformers.

• V-Pro intelligent dimming technology
• Touch control or remote control from dedicated handset or spare button on an existing handset (e.g. TV remote)
• 1-way or multi-way when used with V-Pro IR dimming Supplementary Controller unit(s)
• Soft start feature and intelligent overload protection
• Bevelled edge faceplate
• Recommended Back Box Depth: 25mm
• Maximum Load Rating: LED; 100W (Max. 10 lamps)
• Maximum Current Rating: 0.7A
• Applicable Safety Standard: BS EN 60669-2-1

Safety advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers, TRIAC dimmable loads or electric motors. Do not overload. Product Must Be Earthed.

Intended use: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.
Note: Some LED lamps are not designed for electronic dimmer switches and may remain illuminated even when a dimmer switch is turned off. This can be corrected using one Varilight LEDFix load regulator per circuit (part number YAGF-P).