PIR Syncro Sensor Switch 100-240v, silver, 24mm, wireless pairing Leyton Lighting - PIR-SYNCRO

Description of Leyton Lighting - PIR-SYNCRO

This is Leyton Lighting part no. PIR-SYNCRO.

The PIR - Syncro Motion Detector is a PIR sensor with RF wireless pairing functions.

Once multiple syncro sensors are paired together, activating one sensor will also activate the other paired switches via a RF wireless signal.

The wireless activation, allows multiple lights or group of lights to be installed (each with their own sensor) in different locations such as opposite sides of a kitchen, and have all the lights switch on when either sensor is activated.

• Switches mains voltage (100-240v AC)
• Activation time adjustable from 30 seconds to 10 minutes.
• Maximum Sensor detection range: 2.5m
• Maximum wireless range: 15m
• Cable length from switch body to sensor head: 1.5m
• Cutout required for sensor head installation: 20mm
• Sensor head max diameter: 24.3mm
• Sensor head depth (from bezel, backwards): 13mm
• Sensor head diameter: 24mm
• Sensor switch includes 'permanent on override mode', activated by quickly switching the power supply to the sensor twice - see user guide for further details.
• Maximum switched loads:
• Incandescent lighting and electronic transformers: 250w
• LED drivers and electronic ballasts: 150w
• Inductive ballast: 100w

The sensor unit switches mains voltage (100-240v) so if you are switching low voltage lighting such as LEDs then the sensor will be wired before the transformer or LED driver.

Note: The instruction sheet for this product mentions a remote control and alternative sensor head with a light sensitive option i.e. only activates in dark conditions. This sensor and remote are not available - the supplied sensor head will work in all ambient lighting conditions.