PIR Sensor Switch 100-240v, black, 24mm Leyton Lighting - PIRSENTIM-BL

Description of Leyton Lighting - PIRSENTIM-BL

This is Leyton Lighting part no. PIRSENTIM-BL.

The PIR Sensor switch will switch on the connected lights when it senses motion. It switches off with an adjustable time delay 10 sec to 3 mins.

• Black sensor head
• Voltage: 100-240v AC
• Sensor maximum range: 2.5m
• Cable length to sensor head: 1.5m (max length 1.5m can not be extended)
• Input and output mains wiring required
• Switch body dimensions: 92mm x 20mm x 35mm
• Sensor cut out diameter: 20mm (depth 17-20mm)
• Sensor head diameter: 24mm
• Maximum switched loads:
• Incandescent lighting and electronic transformers: 250w
• LED drivers and electronic ballasts: 150w
• Inductive ballast: 100w

The sensor unit switches mains voltage (100-240v) so if you are switching low voltage lighting such as LEDs then the sensor will be wired before the transformer or LED driver.

Note: The instruction sheet for this product mentions an alternative sensor head with a light sensitive option i.e. only activates in dark conditions. This sensor is not available - the supplied sensor head will work in all ambient lighting conditions.