Clearance offers Evofire+ LED downlights Evofire+ LED Downlight (satin nickel, 4000K, 3.8w, 85mm)

Clearance: Evofire+ LED Downlight (satin nickel, 4000K, 3.8w, 85mm) ILDLFR70D036 - Integral

Clearance: Integral ILDLFR70D036: Evofire IP65 Fire Rated GU10 Downlight Round Satin Nickel for 70mm cut outs - £8.99

Clearance offer details

Clearance item - brand new, unused and in it's original packaging. We just need the space! Delivery is per order not per item - do you need more than one?

Description of ILDLFR70D036 - Integral

This is product manufacturers code ILDLFR70D036 by Integral LED. If you need to contact us about this product, please quote our product reference of 17907.

The 85mm, satin nickel Evofire+ Fire Rated Downlight is a safe and attractive light fitting. The open-back design allows airflow to extend lamp life compared to traditional designs.

Evofire+ is supplied with the replaceable Evolight LED Module (not a standard GU10 light bulb). This means that it can be installed into much tighter spaces, with a total height of only 39mm.

  • Evolutionary Fire Rated fitting designed by Integral LED
  • Supplied with an Evolight (replaceable LED module) and fast-fit, screwless junction box with loop-in, loop-out connectors.
  • Cool White (4000K)
  • 400 lumens
  • Dimmable
  • 36° beam
  • Equivalent brightness to approximately 50w of traditional halogen lighting
  • Fire Rating 30/60/90 minutes - Tested in UKAS Accredited Lab
  • Ultra-thin 1mm 'blend-in' bezel
  • Easy to install
  • IP65 and air tightness compliant with Part C and Part L and resistance to sound complaint with part E building regulations.
  • This downlights fits a 70mm cut-out. The optional adapter ring, which is sold separately, allows installation into holes of 70-100mm.

As well being very tough thanks to its steel construction, The Evofire is also a highly aesthetic choice for Fire Rated lighting. This low profile downlight has a 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights.

As LED products produced using new technologies are used with old dimmer technology, achieving effective and smooth dimming can be challenging. For this dimmable lamp Integral LED have tested, and recommend Varilight V-Pro dimmers. Other dimmers designed for use with LED lights may also work, but dimmers designed for halogen lights must not be used as this could damage the light bulbs and / or the incompatible dimmer module. Always consult the instructions for your dimmer - if in any doubt use the recommended dimmer from Varilight.

What is clearance stock?

Clearance products are products that have previously been available at full price either from us or direct from our suppliers, but the particular range or product is now being discontinued or is overstocked. This means that they are being sold at a discounted rate but stocks are limited and once they have gone there may be no more available.

They are therefore brand new products available at ridiculously reduced prices and should not be confused with B-Grade stock, which is products that are cosmetically damaged, or ex-demo products etc.

  • Clearance items are one-off special purchase products, discontinued product lines, or over stocked items.
  • They are brand new
  • They are not faulty
  • There is limited stock available
  • Normal delivery charges will apply

Buy this product now

(Normally:  £14.68 )
£8.99
Clearance stock available: 3
(all prices inc. VAT at 20%)

Product variations

pecification

Colour / Finish
Satin Nickel
Bulb type
Spot
Lamp cap
N/A - Integrated
Lumens
400
Total wattage
3.8w
Manufacturer
Integral LED
Mfr part #
ILDLFR70D036

Summary

Evofire+ ILDLFR70D036 is a round, satin nickel downlight complete with replaceable 3.8w LED module. 85mm diameter for 70mm cut-outs. Suitable for bathrooms (IP65) and fire rated.