V-Pro Multi-Point Supplementary Control JDSES001S, screwless brushed steel, 1-gang, 2-way Varilight - JDSES001S

Description of Varilight - JDSES001S

This is Varilight part no. JDSES001S.

This is a supplementry dimmer to be used to provide a second dimming control location to a V-Pro Multi-point master dimmer. It can not be used to control lighting without the appropriate master dimmer.

• V-Pro intelligent dimming technology
• Soft start feature and intelligent overload protection
• Use with touch & remote master Multi-Point dimmers in multi-way circuits
• Sleek, low-profile screwless faceplate
• Recommended Back Box Depth: 35mm
• Maximum Load Rating: Refer to Master Dimmer
• Maximum Current Rating: Refer to Master Dimmer
• Applicable Safety Standard: BS EN 60669-2-1

Safety advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.

Intended use: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.
Note: Some LED lamps are not designed for electronic dimmer switches and may remain illuminated even when a dimmer switch is turned off. This can be corrected using one Varilight LEDFix load regulator per circuit (part number YAGF-P).