This is Leyton Lighting part no. UCF-13T5.
T5 fittings are often used under kitchen cabinets to provide a good light on work surfaces. They can also be used to provide discrete lighting in alcoves or other recesses, or over cupboards or pelmets.
Different sizes of fitting are available to suit the spaces to be lit. They can be butted up together, or linked together using link leads to run multiple fittings from one power outlet.
The fitting is supplied with the appropriate lamp, diffuser, fixing clips, butt join connector, end cap, and 2m female end/bare end mains input cable.
Each fitting has it's own built in switch, so they can be individually switched if required.
Different manufacturers use different types of power connectors for T5 fittings. Not all connectors are physically compatible with each other. This means that if you purchase T5 fittings from multiple manufacturers, they will not be easily linkable using the supplied link leads. The images above show the plug and socket used in this fitting.
The link leads are only physically incompatible, which means that it is possible to make a compatible link lead by using two different connectors from different manufacturers.
Tell your friends about this